Build an energy-saving foundation for decoration,

2022-07-22
  • Detail

When decorating, you may be most concerned about beauty and practicality, but have you ever thought of energy conservation? Perhaps, you have always had the good habit of frugality, but have you ever thought that laying a good foundation for energy conservation in decoration can save a lot of money at a small cost? Experts tell you that when decorating, you must read the energy-saving classics well. The key is to do a good job in heat preservation, water saving and energy saving.

when decorating, your most concern may be aesthetics and practicality, but have you ever thought of energy saving? Perhaps, you have always had the good habit of frugality, but have you ever thought that laying a good foundation for energy conservation in decoration can save a lot of money at a small cost? Experts tell you that when decorating, we must read the energy-saving experience well, and the key is to do a good job in the design and construction of heat preservation, water conservation, electricity conservation and other aspects

in terms of thermal insulation

if the original external window in the home is a single glass ordinary window, it is best to replace it with a hollow glass bridge broken metal window, and it is best to install a movable external sunshade for the West and East windows if conditions permit; Try to choose curtains with thick cloth and good heat insulation effect; If the original wall has an internal insulation layer, it cannot be damaged during decoration; If the balcony is connected with the bedroom, the wall and top of the balcony should be equipped with insulation layer; Laying the floor In case of wooden floor, thermal insulation materials, such as mineral (rock) cotton board, flame-retardant foam, etc., can be placed between the grids under the floor; When customizing the door, it can be required to fill the door cavity with fireproof and thermal insulation materials such as glass wool or mineral wool; Doors and windows should be equipped with sealing strips; Residents living on the top floor can also place thermal insulation materials on the paper gypsum board when suspended to improve the thermal insulation

water saving

the focus is to control the selection and installation of kitchen and toilet equipment. It is best to install water-saving faucets and flow control valves, and use water-saving toilets and water-saving bathing appliances. The traditional concept believes that using shower can save water, but from a practical point of view, installing a new bathtub with less water and using it with shower can achieve a more water-saving effect. In addition, at present, the faucets in general family kitchens and bathrooms are pull handle type, which is often difficult to control the flow and increase water consumption. Therefore, the flow control valve can be installed under the faucet of the cabinet and bath cabinet, so that the water flow can be reasonably controlled according to the tap water pressure of the house, so as to achieve the purpose of saving water. In addition, the distance between the water heater and the water outlet should be shortened as far as possible, and the hot water pipeline should be insulated

in terms of power saving

in addition to choosing energy-saving lamps, you can also choose to use a dimmer switch during decoration. As long as one lamp can solve the problem, it can adjust the light to meet different use needs, and can effectively achieve energy saving. In the living room, the lamps and lanterns can be turned on and off separately as far as possible, and try not to choose too complicated chandeliers; Choose to install energy-saving household appliances, reasonably design wall sockets, and try to reduce wiring plug-in boards. Sockets that are not suitable for frequent plugging can be selected with control switches; It is better to install inductive lighting switch in the toilet

天津性病医院

南宁男科医院

成都肝病医院

厦门男科医院

Copyright © 2011 JIN SHI